| Model | 220 / 2000 HE WOR | 220 / 10A HE |
| Part number | 241115.815 | 241119.815 |
| INPUT DATA |
| Voltage range | 85 - 300 V AC/ DC | 85 - 305 V AC |
| Voltage range (nominal) | 185 - 275 V AC/ DC | 176 - 305 V AC |
| Frequency | 0 - 66 Hz | 45 - 66 Hz |
| Maximum current | 11.9 A RMS | 17 ARMS |
| Power Factor | 0.99 (@ 50-100% load) | 0.99 (@ 50-100% load) |
| THD (@ 230 VAC) | < 5 % (@ full load) | < 4% (@ full load) |
| Protection | Varistor for transient protection, fuse in both lines, shutdown above 300/ 305 V |
| OUTPUT DATA |
| Default voltage | 245.3 VDC |
| Voltage range | 178.51) - 297 VDC | 1981) - 280 VD 2) C |
| # Pb cell supported (1.8 - 2.4 V DC/ cell) | 108 - 122 | 108-110 (120 3)) |
| # NiCad cell supported (1.05 - 1.65 V DC/ cell) | 170 - 180 | - |
| Max power, nominal input | 2000 W | 2800 W |
| Max power, 85V input | 850 W | 1304 W |
| Max current, @220V DC | 9.16 A | 10 A 4) |
| Hold-up time, default voltage and 1500 W load | 20 ms, VOUT > 178 VDC | 20 ms, VOUT > 210 VDC |
| Ripple and noise, 30 MHz bandwidth | < 1000 mV PP |
| Current sharing | ±5% of maximum current from 10 to 100% load |
| Static voltage regulation | ±0.5% from 10% to 100% load and nominal input |
| Dynamic voltage regulation | ±5.0% for 10-90% or 90-10% load variation, regulation time < 50ms |
| Protection | Overvoltage shutdown, short circuit proof, high temperature, hot plug -in inrush current limiting, ORing diode |
| OTHER SPECIFICATIONS |
| Efficiency | > 95% | > 95.5% |
| Isolation | 3.0 kVAC – input to output, 1.5 kV AC – input to earth, 1.5 kV DC – output to earth 3 kVAC – CAN to input, 3 kV AC – CAN to output, 500 V AC – CAN to earth |
| Alarms (Red LED) | Low mains shutdown, High and low temperature shutdown, Rectifier Failure, Overvoltage shutdown on output, Fan failure, Low voltage alarm, CAN bus failure |
| Warnings (Yellow LED) | Rectifier in power derate mode, Remote battery current limit activated, Input voltage out of range, flashing at overvoltage |
| Normal (Green LED) | Input and output ok |
| MTBF (Telcordia SR-332 Issue I method III (a)) | >391 000h (@T AMBIENT= 25°C) | >400 000h (@T AMBIENT= 25°C) |
| Operating temperature (5 - 95% RH non-cond.) Output power de-rates above temp / to | -40 to +75°C [ -40 to +167°F] +55°C / 1350W @ +75°C | -40 to +75°C [ -40 to +167°F] +50°C / 1750 W @ +75°C |
| Storage temperature | -40 to +85°C (-40 to +185°F), humidity 0 - 99% RH non-condensing |
| Dimensions[WxHxD] / Weight | 109 x 41.5 x 327mm (WxHxD) [4.25 x 1.69 x 13”] / 1.950 kg [4.3lbs] |
| DESIGN STANDARDS |
| Electrical safety | UL 60950 -1, EN 60950 -1, CSA 22.2 |
| EMC | ETSI EN 300 386 V.1.3.2 EN 61000-6-1 / -2 / -3 / -4 / -5 |
| Mains Harmonics | EN 61000 -3-2 |
| Environment | ETSI EN 300 019: 2-1 (Class 1.2), 2-2 (Class 2.3) & 2-3 (Class 3.2) ETSI EN 300 132-2 2011/ 65/ EU (RoHS) & 2008/ 98/EC (WEEE) |
| Marine compliance (EMC class B with AC filter) | DnV Rules for Classification of Ships, High Speed & Light Craft and DnV Offshore Standards | - |
